This automatic optical fiber tensile testing system is ideal for operator skill independent use in production and lab settings. Two fundamental design configurations enable the consumer to pick between a set up for standard linear evidence testing with additional mandrels for rotary high strength testing.
The linear version is designed for production proof testing with forces up to 22 N. Motor-driven clamps with carefully developed rubber inserts ensure that the TCC Laser Printer For Cable is not really damaged within the screening process while simultaneously eliminating the need for another air provide. Degrees of pulling force, tugging speed and hold time are programmable and easily offered to the operator through the built in Liquid crystal display touch-screen manage. Information from tests can be stored and reached via the Universal serial bus port or Ethernet interface.
Mandrels of the same style as in NYFORS’ optical fiber recoaters can easily be attached to the evidence tester in the rotary higher strength configuration. The fiber is wrapped round the two mandrels which assistance it having a unique clamping mechanism. This way much higher loads can be applied on the fiber, allowing breaking up power tests under controlled circumstances.
Changeable clamp placement facilitates screening with all the highest force amounts as well as testing of brief fiber lengths. The compact and light weight style helps make the tool simple to maneuver in a laboratory atmosphere and also to incorporate within a creation work table in which space are at a premium. The machine is really a lightweight and light-weight tool perfect for testing the strength of optical fibers up to 30 N. The machine is developed to meet all sorts of applications where a strength check must be carried out.
The machine was created using the consumer in mind. The fiber is definitely positioned in the guided linear clamps, and also the screening starts instantly with a “One Touch” go button. The built in microprocessor regulates all of the essential parameters such as tugging force, pulling velocity and hold time. This allows to get a totally controlled test every time.
The machine can be attached to an outside Computer, which enables access to all programmable guidelines and configurations. The machine is adapted to stand-on your own use or to the incorporation into various subsystems. The machine has an substantial capability of signing and conserving details including tugging force, tugging speed and Cable Air Wiper and other guidelines.
Two recoat injector designs are available. The PTR307 utilizes an automated pump to inject the recoat material. The volume of material dispensed from the automatic injector is managed by hand through the top-mounted “Inject” button or programmed to the machine making use of the tablet control. The PTR307B includes a manual recoat shot system that needs the user to manually dispense the recoat materials to the mold cavity; a substitute injector for the PTR307B recoater is available below. Please note that the automatic injector is only suitable for high-index recoat materials, whilst the manual injector is compatible with both low- and high- index recoat material; both are marketed individually below. Please get in touch with Tech Support for additional information.
he manual injector can be mounted to Secondary Coating Line through the 4-40 screws around the recoater real estate (see picture towards the right). Utilize a 3/32″ hex key to safe the injector prior to use. To connect the PTRRRM for the recoater mold, tighten up the connector at the end of the eco-friendly plastic material tubing, then loosen by way of a 1/4 consider enable rotation.
The injector comes with a distribution device and two-place choice handle for directing the flow of recoat materials. A knurled dispensing attach having an internal plunger acts as a syringe for that recoat material. To fill up the syringe, point the handle downward (i.e., towards the recoat bottle), then spin the knurled dispensing attach counterclockwise until it spins easily to fill the syringe (demonstrated in the picture towards the right). Then, to inject the recoat materials into the mold, point the lever horizontally (i.e., facing the knurled attach) and rotate the screw clockwise till near the end in the journey range is achieved. Avoid bottoming out the dispenser since this kqkbws harm the internal plunger; also be careful when re-interesting the threads to prevent cross threading the dispensing screw. A number of fill/inject steps may be needed until air is displaced within the system. Use camera lens cells and an acetone or alcoholic beverages cleaning solution to collect any excess recoat materials that runs from your mold.